STUPIDSID
1(a)
Write short notes on the following (Any four)
Symptons of bad layout
Symptons of bad layout
5 M
1(b)
JIT.
5 M
1(c)
Functional Analysis system Techniques in value Engineering
5 M
1(d)
Waste management
5 M
1(e)
Type I and Type II error
5 M
2(a)
While manufacturing a part, a certain quality characteristics is measured and X and F value are computed.Following are the detail \[\Sigma \bar{X}=100 lan \Sigma R =1.6\] subgroup size is = 5,there are 25 subgroup are 25 subgroup.if the specification limits are 4000±08and if the process is in statistical control,calculate
Process capability
Control limit on \[\bar{X}\] and R charts
Cp and Cpk values
Comment on the process a part within specifications.
Process capability
Control limit on \[\bar{X}\] and R charts
Cp and Cpk values
Comment on the process a part within specifications.
10 M
2(b)
What is plant layout? Discuss different type of plant layouts.
10 M
3(a)
What is Industrial Engineering? Write objectives and scope of industrial engineering. Also explain the role of industrial Engineer in manufacturing industry.
10 M
3(b)
Write the principle of value Engineering
5 M
3(c)
Define the following terms:
Producer's risk
Consumer's risk
AQL
LTPD
Average outgoing quality.
Producer's risk
Consumer's risk
AQL
LTPD
Average outgoing quality.
5 M
4(a)
A work sampling study was conducted to establish standard time for an operation.The observation of study conducted is given below:
Total no.of observation 160
Manual (Hand controlled work)observation=14
machine controlled work observation 106
Machine Idle time observation=40
Average performance rating 85%
No.of parts produced-40
Allowance for personal need and fatigue-10%
Study conducted for three hours
Available working hours/day-8hours
Calculate standard time.
Total no.of observation 160
Manual (Hand controlled work)observation=14
machine controlled work observation 106
Machine Idle time observation=40
Average performance rating 85%
No.of parts produced-40
Allowance for personal need and fatigue-10%
Study conducted for three hours
Available working hours/day-8hours
Calculate standard time.
10 M
4(b)
Define method study.What are its objectives?Also explain factors to be considered while selecting job for method study.
10 M
5(a)
Discuss various modulus of ERP and also its overview.
10 M
5(b)
Discuss various elements of ERP architecture.how will you justify the ERP terms of cost,tangible and intangible benefits?
10 M
Any four
6(a)
Attempts any four of the following
Evolution of ERP
Evolution of ERP
5 M
6(b)
Business process Re-engineering
5 M
6(c)
Therblings
5 M
6(d)
Line Balancing
5 M
6(e)
Cost of quality.
5 M
7(a)
Define work measurement. Also write use of work measurements and list techniques of work measurements.
10 M
7(b)
Define TQM. Explain elements of TQM
10 M
More question papers from Industrial Engineering & Management