SPPU Civil Engineering (Semester 4)
Architectural Planning & Design of Buildings
December 2016
Total marks: --
Total time: --
(1) Assume appropriate data and state your reasons
(2) Marks are given to the right of every question
(3) Draw neat diagrams wherever necessary

Solve any one question fromQ.1(a,b) and Q.2(a,b)
1(a) What is development plan? State its importance.
7 M
1(b) Explain the following principles of architectural planning with suitabe sketches:
i) Prospect
ii) Roominess.
6 M

2(a) Enlist documents to be submitted for seeking commencement Certificate and Occupancy Certificate.
6 M
2(b) State the improtance of Rain Water Harvesting and explain the methods.
7 M

Solve any one question fromQ3(a,b) and Q.4(a,b)
3(a) What are Acoustic Defects? Explain any two in detail.
7 M
3(b) Explain the following:
i) TDR
ii) Fsi.
6 M

4(a) The internal dimensions of a factory building are 30×20× 10m. The number of air changes required are three. The difference between indoor and outdoor temperature is 6°C. Find the area of openings required, if the vertical distance between inlet and outlet openings is 6m.
7 M
4(b) Define the following terms:
i) Picture plane
ii) Vanishing point
iii) Building line.
6 M

Solve any one question fromQ.5 and Q.6
5 Draw a detailed floor plan to a scale of 1:50 of residential building for the given plan below. Use the following data: RCC framed structure, Walk thk 230 mm, Single storey building, Plinth height 500 mm, All dimesions are in mm. Assume suitable location and sizes of doors, windows. Refer the figure.
13 M

6 Design a single storey residential building (Framed structure) and draw a detailed Floor Plan to a scale of 1:50 with the folllowing data:
i) Living room 1 no. Approx area 15 m2
ii) Kitchen cum dining 1 no approx area 15 m2
iii) Bed rooms 2 no. Approx area 12 m2 each
iv) Store room 1 no. Approx area 16 m2.
v) Floor to floor height 3.2m
vi) Foundation and Plinth in UCR masonry
vii) Varandah, Passage, Staircase, W.C and Bath etc. Of suitable size should be provided. Show north direction.
13 M

Solve any one question fromQ.7 and Q.8
7 It is proposed to construct a flooring tile factory. Design the building and draw only Line Plan cosidering all necessary units. The factory must consist of the following data:
i) Adminisration and engineering staff unit
ii) Storage space of raw materials
iii) Producation unit
iv) Storage space for finished products
v) Sanitary blocks etc. Show north direction and mention scale.
12 M

8 Design a single storey hostel bulding and draw only Line plan with the following data:
i) Number of students 40
ii) All rooms are two beded assume suitable size
iii) Recreation room approx. Area 35 m2.
12 M

More question papers from Architectural Planning & Design of Buildings