STUPIDSID
Write a short note on any four of the following.
1 (a)
Zeroth law and its significance.
5 M
1 (b)
Absolute thermodynamic temperature scale.
5 M
1 (c)
Principle of entropy increase and its applications.
5 M
1 (d)
Joule-Thomson porous plug experiment.
5 M
1 (e)
Reheat Rankine cycle.
5 M
2 (a)
State and prove Clausius Theorem.
8 M
2 (b)
A power washer is being used to clean the walls of house. Water at the rate of 0.1 kg/s enters at 20°C and 1 atm, with the velocity 0.2 m/a. The jet of water exists at 23°C, 1 atm with a velocity 50 m/s at an elevation of 5m. At steady the magnitude of the heat transfer rate from power unit to the surrounding is 10% of the power input. Determine the power input to the motor in kW.
12 M
3 (a)
Prove that the difference in heat capacities is [ C_p - C_v = dfrac {TV eta^2} {K_T} ] Where β is volume Expansivity and KT is isothermal compressibility.
10 M
3 (b)
A household refrigerator is maintained at a temperature of 2°C. Every time the door is opened, warm material is placed inside introducing an average of 420 kJ, but making only a small change in the temperature of the refrigerator. The door is opened 20 times a day and the refrigerator operates at 15% of the Ideal COP. The cost of the work is 4 rupees per k Wh. What is the monthly bill for this refrigerator? The atmosphere is at 30°C.
10 M
4 (a)
The swept volume of an working on duel cycle is 0.0053 m3 & clearance volume is 0.00035 m3. The maximum pressure is 65 bar. Heat addition ends at 5% of the stroke. The temperature & pressure at the beginning of compression are 80°C & 0.9 bar respectively. Determine i) work done ii) Mean effective pressure iii) air standard efficiency.
10 M
4 (b)
A steam turbine is supplied with dry saturated steam at 20 bar. The exhaust takes place at 0.3 bar. For a flow rate of 10 kg/s. Calculate
i) Quality of steam at the end of expansion
ii) Power required to drive the pump
iii) Turbine power
iv) The Rankine efficiency
v) The heat flow in the condenser.
i) Quality of steam at the end of expansion
ii) Power required to drive the pump
iii) Turbine power
iv) The Rankine efficiency
v) The heat flow in the condenser.
10 M
5 (a)
What is an irreversibility? State it's types and causes.
6 M
5 (b)
Air enters a compressor in a steady flow at 140 KPa, 17°C & 70 m/s and leaves at 350 KPa, 127°C & 110 m/s. The environment is at 100 KPa, 7°C. Calculate per kg of air-
i) The actual amount of work required
ii) The minimum work required
iii) The irreversibility of the process
i) The actual amount of work required
ii) The minimum work required
iii) The irreversibility of the process
10 M
5 (c)
Calculate the enthalpy, volume and entropy of 2 kg of steam at a pressure of 1.9 MPa having the dryness fraction of 0.85.
4 M
6 (a)
Prove that the entropy is the property of system.
4 M
6 (b)
1 Kg of Nitrogen gas at 1 bar and 300K is compressed to 5 bar and 400K. Find
i) Index of process
ii) Work Transfer
iii) Heat transfer
iv) Change in internal Energy
i) Index of process
ii) Work Transfer
iii) Heat transfer
iv) Change in internal Energy
6 M
6 (c)
Liquid octane CsH18 at 25°C is used as a fuel. Air used is 140% of theoretical air & is supplied at 25°C. Assume a complete combustion & the product leaves the combustion chamber at 1500 K. Find the Heat transfer per kg mole of fuel. Use the following data:
| Substance | hf0 (MJ/K mol) | h298k (MJ/K mol) | H1500k (MJ/K mol) |
| CSH18 (Liquid) | -250 | - | - |
| O2 | - | 8.68 | 49.29 |
| N2 | - | 8.67 | 47.07 |
| H2O (gas) | -241.8 | 9.90 | 57.99 |
| CO2 | -393.5 | 9.36 | 71.078 |
10 M
More question papers from Thermodynamics