STUPIDSID
1(a)(i)
The maximum operating temperature of class Y insulating materials is _______ .
(a) above 180°C (b) 155°C (c) 130°C (d) 90°C
(a) above 180°C (b) 155°C (c) 130°C (d) 90°C
1 M
1(a)(ii)
The unit of absorption coefficient is _______ .
a) W/m2 b) dB c) sabine d) Bel
a) W/m2 b) dB c) sabine d) Bel
1 M
1(a)(iii)
_______ materials are used to make permanent magnets.
a) Diamagnetic b) Paramagnetic c) Soft magnetic d) Hard magnetic
a) Diamagnetic b) Paramagnetic c) Soft magnetic d) Hard magnetic
1 M
1(a)(iv)
The basic principle behind fibre optic communication is _______
a) reflection b) refraction c) total internal reflection d) diffraction
a) reflection b) refraction c) total internal reflection d) diffraction
1 M
1(a)(v)
The grain size of nanomaterials is in the range of
a) 0.1 to 1 nm b) 1 to 10 nm c) 1 to 100 nm d) 10 to 100 nm
a) 0.1 to 1 nm b) 1 to 10 nm c) 1 to 100 nm d) 10 to 100 nm
1 M
1(a)(vi)
Which of the following is not true for soft magnetic materials?
They have
a) low coercivity b) low retentivity c) low permeability d) high susceptibility.
a) low coercivity b) low retentivity c) low permeability d) high susceptibility.
1 M
1(a)(vii)
The life time of an atom in meta stable state is of order of _______ seconds.
(a) 10-9 - 10-8 b) 10-8 - 10-6 (c) 10-6 - 10-3 (d) 10-3 - 10-2
(a) 10-9 - 10-8 b) 10-8 - 10-6 (c) 10-6 - 10-3 (d) 10-3 - 10-2
1 M
1(b)(i)
Weber Fechner law is given as _______ .
(a) L=K / log10I (b) L=Klog10I (c) I=K/log10L (d) I=K log10L
(a) L=K / log10I (b) L=Klog10I (c) I=K/log10L (d) I=K log10L
1 M
1(b)(ii)
_______ is a naturally available dielectric material.
a) air b) nitrogen c) sulphurhexafluoride d) inert gas
a) air b) nitrogen c) sulphurhexafluoride d) inert gas
1 M
1(b)(iii)
The general chemical formula for a ferrite is _______
(a) MOFe2O4 or MFe2O4
(b) MOFe2O3 or MFe2O4
(c) MOFe3O3 or Mfe3O4
(d) MOFe2O2 or MFe2O3.
(a) MOFe2O4 or MFe2O4
(b) MOFe2O3 or MFe2O4
(c) MOFe3O3 or Mfe3O4
(d) MOFe2O2 or MFe2O3.
1 M
1(b)(iv)
Unit of loudness is _______
a) Hertz b) phon c) second d) sabine-m2
a) Hertz b) phon c) second d) sabine-m2
1 M
1(b)(v)
The relation between transition temperature Tc of a superconductor and its isotopic mass M is given as
a) Tc ? M-1/2 b) Tc ? M1/2 c) Tc ? 2M-1/2 d) Tc ? 2M1/2
a) Tc ? M-1/2 b) Tc ? M1/2 c) Tc ? 2M-1/2 d) Tc ? 2M1/2
1 M
1(b)(vi)
For superconductors magnetic susceptibility Xm = _______ .
a) 0 b) 1 c) -1 d) ∞
a) 0 b) 1 c) -1 d) ∞
1 M
1(b)(vii)
Electrical pumping is adopted in _______ laser.
a) Nd:YAG b) CO2 c) Ruby d) Semiconductor
a) Nd:YAG b) CO2 c) Ruby d) Semiconductor
1 M
2(a)
Calculate the polarizability and the relative permittivity in
Hydrogen gas with a density of 9.8x1026 atoms/m3 . Given the radius of the hydrogen atom as 0.50°A.
3 M
2(b)
Derive an expression for magnetic moment in terms of orbital angular momentum.
4 M
2(c)
Discuss in detail advantages of fibre optic cable over metallic cable.
7 M
3(a)
Find the critical current for a superconducting wire of lead having a diameter of 1mm at 4.2 K . Critical temperature of lead is 7.18 K and Hc(0) = 6.5x104 A/m.
3 M
3(b)
How can the depth of sea be measured using ultrasonic waves?
4 M
3(c)
Compare properties of diamagnetic, paramagnetic and
ferromagnetic materials.
7 M
4(a)
Briefly discuss the types of dielectric materials with examples.
3 M
4(b)
Derive Clausius Mossitti equation.
4 M
4(c)
Describe the construction and working of Nd:YAG laser with
suitable energy level diagram.
7 M
5(a)
Find the frequency of the first and second modes of vibration for a
quartz crystal of piezoelectric oscillator. The velocity of
longitudinal waves in quartz crystal is 5.5x103 m/s. thickness of quartz crystal is 0.05m.
3 M
5(b)
Explain what quantum confinement is.
4 M
5(c)
What are superconductors? Discuss Type-I and Type-II
Superconductors.
7 M
6(a)
An optical fibre core and its cladding have refractive indices of 1.545 and 1.495 respectively. Calculate the critical angle ϕc ,
acceptance angle ϕin(max) and numerical aperture.
3 M
6(b)
Give some properties and applications of nanomaterials.
4 M
6(c)
Discuss Piezo electric method of producing ultrasonic waves.
7 M
7(a)
A hall has a volume of 12,500 m3 and reverberation time of 1.5 sec. If 200 cushioned chairs are additionally placed in the hall what will be the new reverberation time of the hall? The absorption of each chair is 1 O.W.U.
3 M
7(b)
Define the following: i) dielectric constant ii) electric flux density
iii) polarization vector iv) electric susceptibility
4 M
7(c)
Explain temperature induced and stress induced transformations in
shape memory alloys in detail.
7 M
More question papers from Physics