STUPIDSID
1 (a)
Sketch the frequency response and identify the following filters based on their pass band i) h[n]={1,−12}ii) H[z]=z−1−a1−az−1i) h[n]={1,−12}ii) H[z]=z−1−a1−az−1
5 M
1 (b)
Justify DFT as a linear transformation.
5 M
1 (c)
Explain the frequency warping in Bilinear transformation.
5 M
1 (d)
What is multi rate DSP? Where it is required?
5 M
2 (a)
An analog filter has transfer function H(s)=s+0.1(s+0.1)2+16H(s)=s+0.1(s+0.1)2+16 Determine the transfer function of digital filter using bilinear transformation. The digital filter should be have specification ωr=π2ωr=π2
8 M
2 (b)
Explain the effects of coefficient quantization in FIR filters.
8 M
2 (c)
The first point of eight point DFT of real valued sequence are {0.25, 0.125-j0.3018, 0, 0.125-j0.518, 0}.
Determine the remaining three points.
Determine the remaining three points.
4 M
3 (a)
x[n]={1,0≤n≤30,4≤n≤7 i) Find DFT X[k]
ii) Using the result obtained in (i) find the DFT of the following sequences. x1[n]={1,n=0 0,1≤n≤41,5≤n≤7 and x2[n]={0,0≤n≤11,2≤n≤50,6≤n≤7
ii) Using the result obtained in (i) find the DFT of the following sequences. x1[n]={1,n=0 0,1≤n≤41,5≤n≤7 and x2[n]={0,0≤n≤11,2≤n≤50,6≤n≤7
10 M
3 (b)
Implement a two stage decimator for the following specifications. Sampling rate of the input signal=20,000 Hz,
M=100
Pass band=0 to 40 Hz, Pass band ripple=0.01,
Transition band=40 to 50 Hz, Stop band ripple=0.002
M=100
Pass band=0 to 40 Hz, Pass band ripple=0.01,
Transition band=40 to 50 Hz, Stop band ripple=0.002
10 M
4 (a)
By means of FFT-IFFT technique compute the linear convolution of x[n]={2,1,2,1} and h[n]={1,2,3,4}.
8 M
4 (b)
Consider the following specification for a low pass filter
0.99 ≤ H(ejω)1≤1.01
0≤ω≤0.3 Π and
1 H(ejω) 1 ≤ 0.01
0.5 Π ≤ 1 ω 1 ≤ Π
Design a linear phase FIR filter to meet these specification using the window design method.
0.99 ≤ H(ejω)1≤1.01
0≤ω≤0.3 Π and
1 H(ejω) 1 ≤ 0.01
0.5 Π ≤ 1 ω 1 ≤ Π
Design a linear phase FIR filter to meet these specification using the window design method.
8 M
4 (c)
Identify whether the following system is minimum phase, maximum phase, mixed phase.
i) H1(z)=6+z-1-z-2
ii) H2=1 - z-1 - 6z-2.
i) H1(z)=6+z-1-z-2
ii) H2=1 - z-1 - 6z-2.
4 M
5 (a)
Design digital FIR filter for following specification. Use hamming window and assume M=7.
10 M
5 (b)
Design digital low pass IIR Butterworth filter for the following specifications:
pass band ripple ≤dB|dB
pass band edge: 4 KHz
stop band attenuation ? 40 dB
stop band edge: 6 KHz
sample rate: 24 KHz
Use bilinear transformation.
pass band ripple ≤dB|dB
pass band edge: 4 KHz
stop band attenuation ? 40 dB
stop band edge: 6 KHz
sample rate: 24 KHz
Use bilinear transformation.
10 M
6 (a)
Write a short note on
i) Dual tone Multi-frequency Signal Detection
ii) Different methods for digital signal Synthesis.
i) Dual tone Multi-frequency Signal Detection
ii) Different methods for digital signal Synthesis.
12 M
6 (b)
The transfer function of digital causal system is given as follows: H(z)=1−z−11−0.2z−1−0.15z−2 Draw cascade form, parallel form realization.
8 M
More question papers from Discrete Time Signal Processing