MU Chemical Engineering (Semester 4)
Chemical Engineering Thermodynamics - 1
December 2015
Total marks: --
Total time: --
INSTRUCTIONS
(1) Assume appropriate data and state your reasons
(2) Marks are given to the right of every question
(3) Draw neat diagrams wherever necessary


Solve any Four of the following
1(a) Three moles of nibgen at 30°C contained in a rigid vessel, its heated to 250°C. How much heat us required to do this, it vessel weight 100 kg and has a capacity of 0.5 \( \dfrac{kg}{kg^{\circ}C} \), how much hat is required? For nitrogen Cv = 20.8 J/mol° Cp = 29.1 J/mol°C.
5 M
1(b) Give statement of first law of thermodynamics and its mathematical form when applied to different processes.
5 M
1(c) sA carnot engine operating between 800°C and 25°C is used to run a carnot refrigerator operating between -20°C and 25°C. It the engine absorbs 10 KJ/s from the reservoir at 800°C, determine the capacity of the refrigerator.
5 M
1(d) Define fugacity and fugacity coefficient.
5 M
1(e) What is a difference between state function and path function.
5 M

2(a) One kmol of an ideal gas at 100 kPa and 300K undergoes the following reversible 20 changes.
(i) Compressed adiabatically to 500 kPa.
(ii) Heated at constant pressure to 800 K.
(iii) Expanded adiabatically to 210 kpa.
(iv) Colled at constant volume to 300 K.
(v) Expanded isothermally to 100 kPa.
Find ΔH, Q, &Detlta;U & W for the individual stage and also for the entire cycle. Also find the thermal efficiency of the process.
Cp= 29.099 kJ/kmol k, Cv = 20.785 kJ/mol K.
20 M

3(a) Find the volume of n-pentane at 500 K and 20 bar for the following cases:
(i) As an ideal gas.
(ii) As Van der waals gas.
Tc=469.6 K, Pc=33.7 bar
10 M
3(b) For an adiabatic process prove that
\[W=\dfrac{P_1 V_1 - P_2 V_2}{\gamma -1}\]
10 M

4(a) Find the compressibility factor at the critical point for a gas obeying vander waal equation of state.
\[\left ( z+\dfrac{27}{64}\dfrac{Pr}{ZTr^2} \right )\left ( 1-\dfrac{Pr}{8ZTr} \right )=1\]
10 M
4(b) A vessel is divided into two parts by a partition, on one side 4 kmol of nitrogen gas at 80°C and 40 bar and on the other side 2 kmol of argon at 120°C and 20 bar are kept. If the partition is removed and the gases are mixed adiabatically, what is the change in entropy? Assume N2 as an ideal gas. Cp = 5/2 R, Cv = 3/2 R.
10 M

5(a) Explain the concept of exergy and get the expression to calculate exergy loss when system changes its state.
10 M
5(b) Calculate the enthalpy and entropy departure for n-octance vapor at 427.85 K and 0.215 Mpa, using the generalized Redlich-kwong equation of state a=4.426 m6 Pa Mol2 and b=164.3 × 10-6 m3/mol; Z=0.9308, B=9.9306 × 10-3.
10 M

6(a) Derive Maxwells equations.
10 M
Write short note on:
6(b) (i) Clauses Inequality.
(ii) Joule Thompson Coefficient.
10 M



More question papers from Chemical Engineering Thermodynamics - 1
SPONSORED ADVERTISEMENTS