Direct Second Year Admissions
IMPORTANT NOTE:
The admission process has been revised from the year academic year 2012-13 and numerous changes have been listed out below. The revised process has also been given below that.
- Two separate processes CAP (for non-autonomous institutes) & CAPAI (for autonomous institutes) have now been clubbed into a single Centralized Admission Process (CAP).
- Number of CAP Rounds has been reduced to a total of 3 CAP Rounds and here's the summary of those rounds.
For students who are out of the CAP Rounds and still wish to pursue engineering, the only options left are:
- DJ Sanghvi College of Engineering, Mumbai
- Mukesh Patel School of Technology Management & Engineering, Mumbai
- Institute of Chemical Technology (ICT), Mumbai
THE PROCESS:
The DTE's site mentions the dates for each of the procedures given in the following steps:
1. Go to the website http://www.dte.org.in/dse12. Fill up the online application form there itself and take its printout. You will have to fill in some personal details such as your name, date of birth, SSC Marks etc. Nothing related what colleges you wish to take at this stage.
2. Go to your nearest Application form Receipt Centre (ARC) with the documents mentioned (original and attested copies) and submit the form. They will give you a STAMPED printout of the form.
3. Check out the provisional merit list displayed on the DTE's site and ensure that all your details are correctly specified in the list. If there is any discrepancy, then go to the ARC on the specified dates and get it corrected.
4. Check out the final merit list displayed along with your State level rank, Home University Rank, Category Rank, AIEEE Rank.
5. After this you'll have to fill in the option form for CAP Round 1. An addition here is that you have to report to the ARC in person and confirm the submission of your online option form.
WARNING: Be very careful while filling the Round 1 form, because if you get a seat from any of the first 3 choices you have submitted, then you are not eligible for further CAP rounds irrespective of whether you take admission in that particular college AND field or NOT. You can, however, choose to not take admission if you get into any of the options 4-100, and you will still be eligible for the second round.
8. Provisional allotment list is then displayed on the site.
9. If you have been allotted a seat in one of your first 3 choices then report to the particular college. You are not eligible for further CAP rounds and have to compulsorily take admission in that particular college AND field. If you don't, you're out of CAP and are left with very few options such as the exceptional colleges mentioned above or one of colleges through Institute Level seats or Minority quotas (if eligible).
10. An institute-wise vacancy list is displayed on the site after each CAP round.
11. If you have not been allotted a seat or have been allotted a seat in one of the 4-100 options and you did not secure admission in it, then you can fill another option form online, i.e, CAP Round 2. This time again you can fill up to 100 choices (you can fill new options or even repeat the same options as round 1), but you HAVE to accept admission wherever you get it. You can’t say NO in round 2.
12. Even after round 2, if you haven’t got a seat then there is CAP round 3.
If you still wish to do engineering, then be prepared to go to AURANGABAD because round 3 is held at Govt. College of Engineering, Aurangabad. It is definitely not advisable to wait this long. In round 3 all the vacant seats are pooled together and students are called one by one (in order of merit) and asked to choose his/her college & field from whatever few seats that remain vacant till round 3.
A SUMMARY OF THE CENTRALIZED ADMISSION PROCESS (CAP)
There are a total of three CAP rounds from the year 2012-12, which are quite nicely tabled here.
| CAP Round No. | No. of Options | Eligibility | Explanation/Remarks |
| Round 1 | Min. 1 and Max. 100 | ALL |
1-3: admission has to be taken. Student is not eligible for further CAP rounds. 4-100: admission need not be confirmed. Student is eligible for further rounds. |
| Round 2 | Min. 1 and Max. 100 | Students who couldn’t secure (or didn’t take) a seat in round 1. | If a student gets allotted, he HAS to take admission. He is not eligible for further CAP rounds |
| Round 3 | It’s counseling in Aurangabad. Everyone gets a seat. | Students who couldn’t get a seat through Round 2 | It’s the last CAP round. There will be no further rounds, but it’s highly advisable to try not to go so far before getting a seat. |
The GROUPS AND SUBGROUPS of Diploma Courses and Corresponding Degree Courses for which Admissions to Direct Second Year shall be given, are given below:
|
Group No. |
Diploma Courses | Degree Courses |
| 1 | Chemical Engineering Group :- | |
|
0101 : Sub-group : A 1. Chemical Engineering 2. Chemical Technology 3. Petro-Chemical Engineering 4. Technical and Analytical Chemistry |
1. Chemical Engineering 2. Chemical Technology 3. Petro-Chemical Engineering 4. Petroleum Engineering 5. Pulp & Paper Technology |
|
| Note:- Direct Admission to second year Degree is given for Chemical Technology Courses in Food Technology, Oil Technology, Fats & Wax Technology, Pulp & Paper Technology, Petro-Chemical Technology, Oil & Paint Technology, Paints Technology and Plastic Technology only in UDCT, Jalgaon & UDCT, Amravati. | ||
|
0102 : Sub-group : B 1. Plastic Engineering 2. Polymer and Plastic Engineering 3. Plastic Technology 4 Rubber Technology |
1. Polymer Engineering 2. Polymer Technology 3. B. Tech. Plastic and Polymer Engineering 4. Plastic Technology |
|
|
0103 : Sub-group : C 1. Sugar Technology |
1. Sugar Technology | |
|
0104 : Sub-group : D 1. Food Technology |
1. Food Technology | |
|
0105 : Sub-group : E 1. Surface Coating Technology 2. Oil & Paints Technology |
1. Oil & Paints Technology 2. Oil Technology 3. Paints Technology 4. Fats & Wax Technology 5. Surface Coating Technology |
|
| 2 | Civil Engineering Groups : - | |
|
0201 : Sub-group : A 1. Civil and Rural Engineering 2. Civil & Sanitary Engineering 3. Civil Engineering 4. Construction Technology 5. Environmental Technology |
1. Civil Engineering 2. Construction Engineering 3. Civil & Water Management Engg. 4. Environmental Engineering 5. B. Tech. Civil Engineering 6. Structural Engineering |
|
| 3 | Computer, Electronics, Electrical, Instrumentation & Bio-Medical Engineering Group :- | |
|
0301 : Sub-group : A 1. Computer Engineering 2. Computer Technology 3. Information Technology |
1. Computer Engineering 2. Computer Technology 3. Computer Science and Engineering 4. Information Technology 5. B. Tech. Computer Science and Engineering |
|
|
0302 : Sub-group : B 1. Digital Electronics 2. Electronics and Communication Engineering 3. Electronics and Video Engg. 4. Sound & Television Engineering 5. Electronics and Tele. Engineering 6. Industrial Electronics 7. Electronics & Radio Engineering 8. Electronics Engineering 9. Electronics Production &Maintenance 10. Electronics |
1. Electronics and Communication Engineering 2. Industrial Electronics Engg. 3. Electronics Engineering 4. Electronics Product Design Technology 5. Power Electronics 6. Electronics and Tele Communication Engineering 7. B. Tech. Electronics and Tele Communication Engineering |
|
|
0303 : Sub-group : C 1. Medical Electronics |
1. Bio-Medical Engineering | |
|
0304 : Sub-group : D 1. Electrical Engineering 2. Electrical Power System |
1. Electrical Engineering 2. Electrical Engineering (Electrical & Power) 3. Electronics and Power Engineering 4. Power Engineering |
|
|
0305 : Sub-group : E 1. Instrumentation 2. Instrumentation and Control |
1. Instrumentation Engineering 2. B. Tech. Instrumentation & Control Engineering |
|
| 4 | Mechanical Engineering Group :- | |
|
0401 : Sub-group : A 1. Automobile Engineering 2. Fabrication Technology 3. Mechanical Engineering 4. Fabrication Technology and Erection Engineering |
1. Automobile Engineering 2. Mechanical Engineering 3. Mechanical Engineering (Sandwich Pattern) 4. B. Tech. Mechanical Engineering 5. Aeronautical Engineering |
|
|
0402 : Sub-group : B 1. Machine Tool and Maintenance 2. Plant Engineering 3. Production Technology 4. Production Engineering 5. Advanced Diploma in Tool and Die Making |
1. Industrial Engineering 2. Production Engineering 3. Production Technology 4. Production Engineering (Sandwich Pattern) 5. B. Tech. Production Engineering |
|
|
0403 : Sub-group : C 1. Packaging Technology |
||
|
0404 : Sub-group : D 1. Metallurgy 2. Metallurgy (Foundry Technology) |
1. Metallurgical Engineering | |
| 5 | Mining Engineering Group :- | |
|
0501 : Sub-group : A 1. Mining and Mine Surveying 2. Mining Engineering |
1. Mining Engineering | |
| 6 | Printing Engineering Group :- | |
|
0601 : Sub-group : A 1. Printing Technology |
1. Printing Engineering & Graphics Communication |
|
| 7 | Textile Engineering Group :- | |
|
0701 : Sub-group : A 1. Knitting Technology 2. Man made Fibre Manufacturing 3. Textile Manufacture (Cotton) 4. Man made Textile Technology 5. Garment Technology 6. Dress Designing & Garment Mfg. 7. Handloom Technology |
1. Man made Textile 2. Textile Engineering / Technology 3. Textile Plant Engineering 4. Textile Engineering ( Fashion Technology) |
|
|
0702 : Sub-group : B 1. Man made Textile Chemistry 2. Textile Technology 3. Textile and Analytical Chemistry 4. Technical Chemistry |
1. Textile Chemistry | |
Note: Direct Admission to second year Degree is given for Chemical Technology Courses in Food Technology, Oil Technology, Fats & Wax Technology, Pulp & Paper Technology, Petro-Chemical Technology, Oil & Paint Technology, Paints Technology and Plastic Technology only in UDCT, Jalgaon & UDCT, Amravati.
